-
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 6 months ago
Does anyone has encountered the same error in MATLAB 2020? Any help would be appreciated.
Thank you
-
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Thank you for your reply. Connecting to the VPN solved my problem, but another error has been popped up in the command window. Please see attached the log and last error files.
Thank you
-
n-ghasemian replied to the topic Error in main in the forum Sarproz Forum 3 years, 7 months ago
I used the link and updated SARProz, but now a similar error popped up in my command window.
-
periz replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Hi,
when you get messages as:
* internet access failure
* to start the tool, an internet connection is required
it means, your network has problems, the software cannot access the servers to get the information to start.
it’s a network problem: either your internet provider, or your area, or your country or any other restrictions affecting your…[Read more] -
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Hello again,
Updating SARProz to version 2020 didn’t solve the problem. I also tried with both the wifi and mobile connection. Even I tested with VPN, but any of them didn’t help. It’s very emergent because I need to reprocess the sentinel-1 SLC files, and I don’t have much time. Please see attached the log file. Any help would be…[Read more]
-
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Hello,
Here is the log file attached.
Thank you
-
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Thank you for your reply.
After reading the forum posts, I found out that it’s a bug happening in newer MATLAB versions. Where can I update the SARProz?
-
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Thank you for your reply.
After reading the forum posts, I found out that it’s a bug happening in newer MATLAB versions. Where can I update SARProz (pcode)?
-
periz replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
1. please read the forum rules. you must include logs and errors or we cannot help
2. please read through the fourm https://www.sarproz.com/groups/sarproz-group/forum/topic/error-in-main/
3. please update your sarproz version.
any further topics posted without checking the forum, without uploading enough infos, without updating the software will…[Read more] -
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
After allowing the Matlab through the firewall and restarting the computer, I solved this problem, but now I have another question. When I type fig=main in the command window, the following error raises:
Error: File: check_advpar.p Line: 75 Column: 0
Invalid syntax for calling function ‘license’ on the path. Use a valid syntax or explicitly…[Read more] -
n-ghasemian replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Thank you for your reply.
I tried with my mobile internet connection and a VPN, but the same problem persisted. The network that I am using is the same as the one I used before. I didn’t have the same problem before, and I have no idea what the problem is.
The Pcode version that I am using is 2019-10-02. Maybe installing a newer version would s…[Read more]
-
periz replied to the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
your network has problems.
change the network or use a VPN
best -
n-ghasemian started the topic Problem with SARProz license file in the forum Sarproz Forum 3 years, 7 months ago
Hello colleagues,
I wasn’t using SARProz for a while, and I tried to use it again in the last couple of days. When I type fig=main; in the Matlab command window, I get the following error. I even send my license file to licensing@sarproz.com, and they sent me a new one, but the same error persisted.
I have no idea what’s the problem, and any…[Read more]
-
periz replied to the topic aps test problem in the forum Sarproz Forum 3 years, 7 months ago
This is a matlab MCR crash, happening while writing a file.
possible reasons:
* the disk is full
* the disk is corrupted
However, other explanations are possible as well. What’s the RAM of your system? Monitor its usage. Possible related reasons:
* RAM is over and you do not have a swap space and/or the swap space is not available/is corrupted
*…[Read more] -
skyam started the topic aps test problem in the forum Sarproz Forum 3 years, 7 months ago
Hello
I have a problem with aps test . after pressing the test button, the software is closed. I sent you the log . I will be thankful if you pay attention.
thank you
skyam -
dumindarw joined the group sarproz-group 3 years, 8 months ago
-
umutcan9821 replied to the topic Combine different geometries for decomposition of LOS motion? in the forum Sarproz Forum 3 years, 8 months ago
Hello Dear Friends,
The analysis of just 100 ascending data give a LOS displacement or vertical displacement automatically in SARPROZ. If It gives LOS, how Can I convert it into vertical displacement. -
periz replied to the topic Cannot configure sarproz mac matlab2020 in the forum Sarproz Forum 3 years, 8 months ago
the license for windows is different from the one for linux/mac
did you do this?:
1) open a terminal (2) type ‘hostname’ (3) ping the returned name (eg: ping mycomputername)
(4) if no packets are received, add the name returned by ‘hostname’ to the file /etc/hosts -
yvhout joined the group sarproz-group 3 years, 8 months ago
-
jcm93 joined the group sarproz-group 3 years, 8 months ago
- Load More