-
periz replied to the topic understanding aps estimations parameters and results in the forum Sarproz Forum 6 years, 7 months ago
About a. b. and c. just go with a. The other options are still experimental.
About thresholds, use the suggested ones as starting point. If you are not happy, try to rise the minimum value for being more restrictive. -
periz replied to the topic understanding aps estimations parameters and results in the forum Sarproz Forum 6 years, 7 months ago
The result looks reasonable.
To check if the APS was well estimated, you the final “test” function. If the final coherence is high and evenly distributed, you are done. You can also plot the APS one by one to check for issues.
To understand if the height estimation range is correct, check the histogram of the connections residual height. You can…[Read more] -
periz replied to the topic Linux compiled version problem in the forum Sarproz Forum 6 years, 7 months ago
You should follow the instructions:
“you need to send an email to licensing@sarproz.com attaching the file license.key ”
best -
periz replied to the topic APS processing and coherence in the forum Sarproz Forum 6 years, 8 months ago
By looking at your images I have to make the following comments:
1. I am not sure if 0.7 ampl stab is a good threshold with 26 images. it would be useful to see the reflectivity map and the ampl stab map to have a better idea.
2. the range of height you are trying to estimate is too big. consider that you are processing connections (nearby…[Read more] -
periz replied to the topic No external Sentinel orbits in the forum Sarproz Forum 6 years, 8 months ago
Good that it was solved…
-
periz replied to the topic no window for site directory path selection in the forum Sarproz Forum 6 years, 8 months ago
Hi Estelle,
unfortunately the Matlab version you are using does not allow us debugging errors.
My feeling is that you should kill everything, try again and it may work. If not, we need to look at that together via remote connection.
Best
dan -
periz replied to the topic coregistration error in the forum Sarproz Forum 6 years, 9 months ago
This is not a coregistration error, it’s a java problem
are you sure you are starting matlab from the pcodes directory? -
periz replied to the topic Slant Range in the forum Sarproz Forum 6 years, 9 months ago
EXT folder, there is a directory for each image
inside those directories you can find a text file yyyymmdd.meta (careful, there is also a .meta.mat file).
You can derive R0 from the Range Start Time that you find there.
otherwise, type “fast” in matlab (without quotes) hit enter and then:
R0=leggi_img(handles.SiteParam.DirSite,Master,{‘R’}) -
periz replied to the topic Custom mask generation with multi geometry doesn't work in the forum Sarproz Forum 6 years, 10 months ago
At the moment you can use a polygon at a time and generate 2 masks. Then, either you merge them in matlab or you can use the scatter plots and say “mask1 or mask2”. if you send us the kml, we’ll improve the code for importing MultiGeometry objects
-
periz replied to the topic Coregistration Refinement in the forum Sarproz Forum 6 years, 10 months ago
The coregistration refinement is doing 1 single operation:
it is taking the external DEM and it is using it to resample the image by correcting topographic distortions.
In other words, the sw is not going to re-process the cross-correlation between patches, this was already done during the initial co-registration (and this is the reason why it…[Read more] -
periz replied to the topic Problem with external DEM in the forum Sarproz Forum 6 years, 10 months ago
To check if the process was well concluded,
you just need to plot the external DEM in SAR coordinates with the “view parameters” function.
Also, to check your original DEM, you should plot it with “DEM visualization”.
But surely the process failed, if you look in the log file, you got a considerable amount of errors.
Probably your DEM is in UTM…[Read more] -
periz replied to the topic Combine different geometries for decomposition of LOS motion? in the forum Sarproz Forum 6 years, 10 months ago
A first question would be: did you select points representative of the area where they are located or did you choose outliers?
Secondly, the software decomposes asce/desce velocities only on AD pairs. AD pairs are points located closely in A/D datasets. The sw selects them based on your inputs (AD processing) and based on the corrected shifts…[Read more] -
periz replied to the topic Combine different geometries for decomposition of LOS motion? in the forum Sarproz Forum 6 years, 10 months ago
Can you please post an example?
-
periz replied to the topic Combine different geometries for decomposition of LOS motion? in the forum Sarproz Forum 6 years, 10 months ago
Hi Cecilia,
to find out where is the sign problem, I’d suggest you to find a case where the Asce and Desce velocities have opposite sign.
Where A is + and D is -, the point must move to the W. If the plotted result is positive, it means that the E-W component was assumed positive to the W. If you can confirm it, we will change sign and change the…[Read more] -
periz replied to the topic The displacement value comes out "increase" in the forum Sarproz Forum 6 years, 10 months ago
Hi leewoneung,
I am sure that the guys in Beijing will be able to check the matter with you.
good work -
periz started the topic Sarproz Release 2017.5 in the forum Sarproz Forum 6 years, 10 months ago
The new release presents a new optional module, in between the APS processing module and the MISP one.
The new module is called “Graph Analysis and Refinement” and it can be used for two main tasks.* The first task is the analysis of the (previously processed) APS graph. By applying a threshold on the connections coherence, one can analyze the…[Read more]
-
periz replied to the topic Unable to get contents Sentinel1 data set in the forum Sarproz Forum 6 years, 11 months ago
This is a similar discussion:
https://www.sarproz.com/groups/sarproz-group/forum/topic/import-sentinel-1a-data/and in this link one can see the correct folder tree:
https://www.dropbox.com/s/k4odh9ye4k422in/Screenshot%202017-09-29%2019.12.36.png?dl=0 -
periz replied to the topic "Index Exceeds Matrix Dimensions" in the forum Sarproz Forum 6 years, 11 months ago
Hi Dimitris,
1. please take the time to read the messages from the software. You can learn a lot from them. They are included in the log file you attached.
2. one of the messages says: “If you need assistance, please include the file lasterror.mat “. without that file we cannot help.
3. here you have some material to learn how to use the software…[Read more] -
periz replied to the topic Unable to get contents Sentinel1 data set in the forum Sarproz Forum 6 years, 11 months ago
Hi Joana,
such message is a warning, not an error. The log also says that the file you cannot modify is a file contained in the original SLC data, and this is not a problem, since the software is not going to overwrite those files.
Your problem is that your SLC data are partial or corrupted. The log says:
Error in s1_slc2file(): can not find…[Read more] -
periz replied to the topic javaclasspath error in compiled version in the forum Sarproz Forum 6 years, 11 months ago
Hi Antonio,
If you restart the software,
you should get a different message, did you try it?
Something else to try:
(1) open a terminal (2) type ‘hostname’ (3) ping the returned name (eg: ping mycomputername)
(4) if no packets are received, add the name returned by ‘hostname’ to the file /etc/hosts - Load More