SARPROZ ©

Hi,
1. you have an old software version, if you want you can get a more recent one with the manage version module
2. in some cases that might still be under investigation sentinel interferograms can be affected by phase jumps along the range direction between two adjacent bursts in azimuth. the message you got warns you of such a possible case
best

hi
here you can see some explanations https://sarproz.com/manual/scegli_dataset.html
just import a text files with a column of values of temperature in Celsius degrees, one value for each image. Ideally, the temperature should be measured at the satellite acquisition time
best

Does anyone has encountered the same error in MATLAB 2020? Any help would be appreciated.

Thank you

Thank you for your reply. Connecting to the VPN solved my problem, but another error has been popped up in the command window. Please see attached the log and last error files.

Thank you

I used the link and updated SARProz, but now a similar error popped up in my command window.

Hi,
when you get messages as:
* internet access failure
* to start the tool, an internet connection is required
it means, your network has problems, the software cannot access the servers to get the information to start.
it’s a network problem: either your internet provider, or your area, or your country or any other restrictions affecting your…[Read more]

Hello again,

Updating SARProz to version 2020 didn’t solve the problem. I also tried with both the wifi and mobile connection. Even I tested with VPN, but any of them didn’t help. It’s very emergent because I need to reprocess the sentinel-1 SLC files, and I don’t have much time. Please see attached the log file. Any help would be…[Read more]

Hello,

Here is the log file attached.

Thank you

Thank you for your reply.

After reading the forum posts, I found out that it’s a bug happening in newer MATLAB versions. Where can I update the SARProz?

Thank you for your reply.

After reading the forum posts, I found out that it’s a bug happening in newer MATLAB versions. Where can I update SARProz (pcode)?

1. please read the forum rules. you must include logs and errors or we cannot help
2. please read through the fourm https://www.sarproz.com/groups/sarproz-group/forum/topic/error-in-main/
3. please update your sarproz version.
any further topics posted without checking the forum, without uploading enough infos, without updating the software will…[Read more]

After allowing the Matlab through the firewall and restarting the computer, I solved this problem, but now I have another question. When I type fig=main in the command window, the following error raises:

Error: File: check_advpar.p Line: 75 Column: 0
Invalid syntax for calling function ‘license’ on the path. Use a valid syntax or explicitly…[Read more]

Thank you for your reply.

I tried with my mobile internet connection and a VPN, but the same problem persisted. The network that I am using is the same as the one I used before. I didn’t have the same problem before, and I have no idea what the problem is.

The Pcode version that I am using is 2019-10-02. Maybe installing a newer version would s…[Read more]

your network has problems.
change the network or use a VPN
best