-
ivca-cz replied to the topic errors about get co-registration and get weather data in the forum Sarproz Forum 7 years, 8 months ago
Hello,
I got probably the same error in the last (20-Dec) version, but i ignored it (without counting the number of images, so maybe one or two could be missing, but maybe not) and everything seemed to be allright… this is the problem of the last version. I only checked the coregistered images and they seemed to be okRegards, Ivana
-
Yuxiao replied to the topic errors about get co-registration and get weather data in the forum Sarproz Forum 7 years, 8 months ago
I will need some time to replicate the problem and found out what is going on,
yuxiao
-
cnuhyl replied to the topic errors about get co-registration and get weather data in the forum Sarproz Forum 7 years, 8 months ago
OK,The attachment is the SLC filenames. Thank you !
-
Yuxiao replied to the topic errors about get co-registration and get weather data in the forum Sarproz Forum 7 years, 8 months ago
Hi YaLe,
send me the list of SLC filenames, I need to run your data and browse through all the problems.
yuxiao
-
cnuhyl started the topic errors about get co-registration and get weather data in the forum Sarproz Forum 7 years, 8 months ago
Hi,
when I co-registration the sentinel data there is an error said that:Index exceeds matrix dimensions. And when I get the weather data the error said:Attempt to reference field of non-structure array.
The attachmens are the log file and lasterror. Can you help me solve these errors?Thank you!
-
periz started the topic Last Sarproz Release in the forum Sarproz Forum 7 years, 8 months ago
Dear all,
many changes have been implemented in the past months.
I give here a brief overview of the major ones.
1) drastic improvement in low level reading functions. In particular, reading a full matrix sparsely is now much faster than before (to test it, use the load mask function and select points applying a threshold on the reflectivity map).…[Read more] -
periz replied to the topic Error in Running the main.exe file in the forum Sarproz Forum 7 years, 8 months ago
Dear Mirzadeh,
sorry for the late answer.
The software is telling you to close the application and start it again, I suppose you did it and it did not solve your issue.
Then it should be a java problem. Are you using both IPv4 and IPv6?
try the following:
open cmd as administrator and run:
netsh winsock reset
the launch the software again
let me know -
periz replied to the topic invalid file identifier in Interferograms processing in the forum Sarproz Forum 7 years, 8 months ago
hi matus,
there is a message:
allocate: couldn’t create file H:bratislava_snt1_73_asc_NEWTRIBLAVINAINTERFEROGRAMS20160202-20160731 : aborting
you should check if the disk if full or if there is a file named like that that cannot be overwritten… -
matusbakon started the topic invalid file identifier in Interferograms processing in the forum Sarproz Forum 7 years, 8 months ago
Hi,
while processing Sentinel-1A/B interferograms I get following error:
Invalid file identifier. Use fopen to generate a valid file identifier.Thanks.
-
ivca-cz replied to the topic splitting a dataset in the forum Sarproz Forum 7 years, 8 months ago
Hi Daniele,
thank you.
I tried points 2 and 3. With point 2, however, I could not see a difference in the reflmap (it seems to me that it is computed from all the images), but the problem was solved with point 3, with no problem (just warnings) with the master image.Regards, Ivana
-
periz replied to the topic splitting a dataset in the forum Sarproz Forum 7 years, 8 months ago
Hi Ivana,
there are several ways to do what you want to do.
1. if you want to process temporary targets, you can analyze the amplitude time series with an on/off model http://sarproz.com/manual/amp_series_proc.html and then use the amplitude as a weight in the insar time series processing frames
2. you can select the images to process in the…[Read more] -
ivca-cz started the topic splitting a dataset in the forum Sarproz Forum 7 years, 8 months ago
Hello Daniele,
(thank you for the implementation of the SRTM download change.)
I am facing a special problem: to split an already coregistered dataset into two, resp. excluding a significant number of images (I need to perform the processing of installed reflectors separately after the data they were installed).
But, in the dataset, the master…[Read more]
-
mmorigi replied to the topic Envisat-ASAR, SLC – IMS with VV polarization. in the forum Sarproz Forum 7 years, 8 months ago
sorry.
MM -
periz replied to the topic Envisat-ASAR, SLC – IMS with VV polarization. in the forum Sarproz Forum 7 years, 8 months ago
u forgot the attachment
-
periz replied to the topic SRTM files in the forum Sarproz Forum 7 years, 8 months ago
Thank you Ivana,
we will upload a new version in the next hours
dan -
mmorigi started the topic Envisat-ASAR, SLC – IMS with VV polarization. in the forum Sarproz Forum 7 years, 8 months ago
Hi all,
I imported the Envisat_ASAR, SLC – IMS with VV polarization.
The problems that I meet are registered on the attached file.
thank you
Massimo Morigi -
ivca-cz started the topic SRTM files in the forum Sarproz Forum 7 years, 8 months ago
Hi Daniele,
the link to SRTM files (for download) has changed. Here is the (“.zip”) file downloaded which makes SARPROZ to give an error during get contents or set orbits steps:
<!DOCTYPE HTML PUBLIC “-//IETF//DTD HTML 2.0//EN”>
<html><head>
<title>301 Moved Permanently</title>
</head><body>
<h1>Moved Permanently</h1>
<p>The document has moved he…[Read more] -
periz started the topic new paper on infrastructure monitoring in the forum Sarproz Forum 7 years, 8 months ago
Dear all,
here the last paper on infrastructure monitoring based on Sarproz results and published on Nature Scientific Reports
http://www.nature.com/articles/srep37408
Please feel free to spread it among your colleagues -
nematisadegh replied to the topic "Set Orbits" error in the forum Sarproz Forum 7 years, 9 months ago
Actually i am using “Remote Desktop” to connect a server computer and K:\ is my directory in there.
You are right Dr. the problem was my directory name.Thanksregards
Nemati -
periz replied to the topic "Set Orbits" error in the forum Sarproz Forum 7 years, 9 months ago
if you check the messages given by the software
which can also be read in the log file
you will see that your site directory is: K:
did you write the directory name using strange characters?
please rename the directory
also, download the last sw version with the “manage version” module, it seems that you are using a recent version of matlab and…[Read more] - Load More