[asteriospapas]

Thank you for the quick reply.
So from what I understand flagging the Phase operation when exporting the Def. Trend is not correct? Because it is in the real domain?

Thank you in advance,

Asterios

[asteriospapas]

Thank you Mr Perissin for the quick response.

[asteriospapas]

thank you for your help and always fast response.
asteris

[asteriospapas]

I apologise for the delayed thank you.
We appreciate the help. The results, with carefully consideration of the above suggestions, were found really close to the expectation we had.
Thank you again and always congrats on the work being done.

[asteriospapas]

Thank you for the super fast response.
we are running now the data with what you suggested.

Regarding the graph analysis and refinement, we have looked at it, but we do not understand the parameters exactly what they exactly they are for. Checking the manual it doesn’t really go in depth:
(from manual)
3. press the button “go” in the “clusters processing” frame to apply the chosen threshold. The software will tell you how many clusters are generated
4. plot the clusters with the “plot” button
5. choose a radius to select local references within clusters and press the “go” button next to it
6. view local references with the “plot” button next to the radius.
7. choose the method to adopt (a. connecting clusters via the local references, b. processing only the main cluster, c. processing clusters separately)
8. you can optionally add more points to the graph using the “points densification” frame: choose a parameter, add a threshold, choose a maximum distance
(w.r.t. the existing points), choose whether to use or skip the initial mask, press the button “go”
9. you can optionally display the new points and the new graph with the corresponding buttons

would it be possible to have a better understanding on these selections: a. connecting clusters via the local references, b. processing only the main cluster, c. processing clusters separately
and on what threshold should it be wise to select on the “clusters processing”, because it automatically selects the threshold from the non-linear weighting of the aps processing, is it ok to continue with this one?

Thank you again,
Asterios

Attachments:

You must be logged in to view attached files.

[asteriospapas]

I also added this image.

Attachments:

You must be logged in to view attached files.

[Author]

Posts