[antig]

i did not saw any update option in the morning

[antig]

Is there any instruction somewhere on where and which files should be placed so that SarProz can find and read them?

[antig]

Fringes are visible
Try multilook result Rg 15 Az 5 before UW

[antig]

APS is long wave length signal. So 0.7 seems fine spatial distribution for aps. In sparse point protssesing u may use lower ASI 0.6 for exaple

[antig]

Export image that you are interested to geotif
Then use, for example, gdal to translate tif file to csv. It should be possible to do in Qgis to

[antig]

SLC Should work well

[antig]

DSF is DownSamplingFactor
Because APS is low frequency signal then the APS results will be multilooked in that factor

[antig]

No, it is not ok

[antig]

It is not to mutch information to tell exactly. if You have sentinel 1 images stack, You may use first Smart 5 option (remove thermal manualy). Then You will have data to analyse how big are the movements in AOI

[antig]

Additionaly, I suggest to use Graph Analysis and Refinement module. It is between APS and SPP button. There is possible to remove low coherence connections and improve APS graph.

[antig]

Ho big is Your bridge. If it is less than km You may skip APS and use small area module

[antig]

I solved the problem myself.
the problem was in coregistration.

Firstly I used “only orbits” mode for coregistration.
After analyse of Site.log the program had gave warning to that in coregistration has some thing wrong.

I tried “Ampl Xcorr” mode for coregistration and it worked match better. No warnings, No Stripe

So in future I use “Ampl Xcorr” as default

[antig]

You may set in module “Insar params” appropriate settings
Do not filter and multilook interferograms check “Flattening” and “DEM remove”
save settings
genereate interfereograms in module “interferograms protsessing”

[antig]

Thank You Daniele
I understood it now
Agree, that this is weird, but possible, way to illustrate direction.

[antig]

I don’t understand. Where is no such warning discribed in forum (I searched). And no lasterror.mat also because this is a warning not error

[Author]

Posts